When you’re one of those people who never has to deal with clogged drains, it’s easy for you to think that these drains are always perfect. However, like anything in life, sometimes these things happen – and when they do, it can be a big mess! Here is a step-by-step guide on how to unclog your drain with what you have around the house. Discover diy concrete pool.
What are the Parts of a Toilet?
There are many parts to a toilet and bathtub drain. The following is a brief description of each part.
Toilet – The toilet is the basic component of a bathroom. It consists of a tank, bowl, flapper, and drainage system. When you flush the toilet, water goes into the bowl and causes the flapper to close. This sends water down the drain.
Bathtub – A bathtub is similar to a toilet in that it has a tank, bowl, and flapper. However, the bathtub has one major difference: its drainage system. When you get in the bathtub, water flows down from the showerhead over your body and into the tub. This water carries dirt and debris with it. Eventually, all of this material makes its way through the drain and out of the bathroom. Find out germinating seeds in paper towel.
Why Does a Clogged Drain Happen?
There are a few things that can cause a clogged toilet or bathtub drain. Here are the most common culprits:
-Dirt, hair, and soap particles clog the smaller drains in your bathroom and Kitchen sink. Over time, these small blockages can become large enough to prevent water from flowing freely.
-Water backed up from toilets or showers can fill up the smaller drains in your home. When this water tries to flow out again, it can get stuck due to all of the built up debris.
-Flooding can occur when there is a break in the drainage system somewhere in your house. This can allow sewage and rainwater to mix and create a big clog.
How to Unclog a Toilet or Bathtub Drain
If your toilet or bathtub drain is becoming clogged, there are a few easy steps you can take to clear the obstruction. Follow these simple steps and your bathroom will be back to normal in no time!
1. Pour a pot of hot water into the bathtub or toilet and let it run. This will loosen any debris that may be stuck in the drain.
2. Use a plunger to suction onto the clog and pull. Be sure to move the plunger in a circular motion to avoid jamming. If necessary, use a second plunger to help dislodge the blockage.
3. Pour a pot of cold water into the bathtub or toilet and let it run. This will help clear out any debris that was pulled out of the drain with the plunger.
4. Repeat steps one through three if necessary. Get info about elephant decor.
How to Prevent Clogs in the Future
One of the most common causes of clogs in drains is improper waste disposal. If you don’t regularly clean out your sink, bathtub and toilet drain, they will become full of build-up, which will cause them to clog. Here are some tips on how to prevent clogs in the future:
1. Clean out your sink, bathtub and toilet drain every day. This includes removing all the old food and water clumps, as well as any dirt or debris that has settled over time.
2. Never put objects down the drain that can easily become stuck, such as sticks, wire hangers or coins.
3. always clear any drainage from around the sink before flushing. This will help prevent backups from happening in the first place.
4. If a blockage does occur, use a plunger to dislodge whatever is causing the problem. Be careful not to damage the drain itself in the process. Look at the ceiling decorations.
Conclusion
If your toilet or bathtub drain is clogged, there are a few things you can do to try and unclog it. First, use hot water and a plunger to clear the drain of any objects that may be obstructing it. Second, pour a pot of boiling water down the drain and wait five minutes; if the drain still isn’t clearing, use a snake to clear any debris. If all else fails, call in a professional!
